Garden Walk Maker Paving Mould for Driveway Path Brick Patio Concrete Slabs DIY
Regular price
$32.80 AUD
Sale price
$32.80 AUD
Regular price
Unit price
per
Sale
Sold out
Shipping calculated at checkout.
Couldn't load pickup availability
Description
Description:
Material: PP Resin
Color: Black
Size: 43 x 43cm
How to use this Concrete Paver Mold to build the pathways:
Step 1:
Mix cement with water, according to package directions. When ready to use, the concrete will be the consistency of oatmeal and thick enough to hold an edge when you slice into it with a shovel.
Step 2:
Fill the paver mold, scooping the concrete in with a shovel and making sure to fill each area.
Step 3:
Using rubber gloves, spread the concrete around the mold, filling in any gaps or low points. Tap the mold with your hand to eliminate any air bubbles.
Step 4:
Following the contours of the mold, smooth out the concrete, wiping away any excess.
Step 5:
Allow the concrete to set for a maximum of five minutes, then carefully remove the mold. For the next stretch, rotate the mold a quarter-turn and place it beside the paver just completed, angling slightly if you're creating a curving pathway.
Step 6:
After letting the concrete cure overnight, fill the cracks with dirt and wash away any excess. Wet the ground around the newly formed pavers to help them settle
Package Included:
1 x Concrete Slabs Path Walk Maker Mould
[DIY BOARD] This concrete Cement Board is design for DIY lovers, who want to decorate their garden road as they like, to give their pavement and yards some artistic sense.
[EASY TO USE] This Stepping stone mold is easy to use, no special skills required, even an inexperienced person can build a beautiful pathway.
[STUARDY and RESUABLE] This Concrete pavement board is made of high quality plastic, just clean it with water after used and then you can use the board for a long time.
[UNIQUE SHAPE] This walk path maker Laying out the effect posted up like blocks of stones, so the path is more exotic, to create a style of their own road path.
Material: PP Resin
Color: Black
Size: 43 x 43cm
How to use this Concrete Paver Mold to build the pathways:
Step 1:
Mix cement with water, according to package directions. When ready to use, the concrete will be the consistency of oatmeal and thick enough to hold an edge when you slice into it with a shovel.
Step 2:
Fill the paver mold, scooping the concrete in with a shovel and making sure to fill each area.
Step 3:
Using rubber gloves, spread the concrete around the mold, filling in any gaps or low points. Tap the mold with your hand to eliminate any air bubbles.
Step 4:
Following the contours of the mold, smooth out the concrete, wiping away any excess.
Step 5:
Allow the concrete to set for a maximum of five minutes, then carefully remove the mold. For the next stretch, rotate the mold a quarter-turn and place it beside the paver just completed, angling slightly if you're creating a curving pathway.
Step 6:
After letting the concrete cure overnight, fill the cracks with dirt and wash away any excess. Wet the ground around the newly formed pavers to help them settle
Package Included:
1 x Concrete Slabs Path Walk Maker Mould
